Transporting The Unit; Grass Cutting Blades Up To - Stihl FS 160 Manual De Instrucciones

English
► Open the throttle wide.
► Crank the engine several times with the starter
to clear the combustion chamber.
► Refit the spark plug – see "Spark Plug".
► Move the slide control to START.
► Turn the choke knob away from g – even if
the engine is cold.
► Now start the engine.
14.5.2 Throttle cable adjustment
► Check adjustment of throttle cable – see chap‐
ter on "Adjusting the Throttle Cable".
14.5.3 If fuel tank has been run completely
dry and then refueled
► Crank the engine – note that the engine will
not start immediately because the carburetor
first has to be primed with fuel.

15 Transporting the Unit

15.1 Using Transport Guard
The type of transport guard depends on the
metal cutting attachment supplied with the
machine. Transport guards are available as spe‐
cial accessories.
15.2 230 mm Grass Cutting Blades
84
15.3

Grass Cutting Blades up to

260 mm
2.
► Disconnect wire rod from the transport guard.
► Swing wire rod outwards.
15 Transporting the Unit
1.
0458-323-8721-D