Stihl FS 160 Manual De Instrucciones página 72

English
WARNING
Deflector (2) is approved for grass cutting blades
and brush knives only and must therefore be
mounted before fitting a grass cutting blade or
brush knife.
2
WARNING
Deflector (2) may also be used for mowing heads
if it is equipped with the skirt and line limiter
blade, see "Mounting Skirt and Blade".
3
WARNING
Deflector (3) is approved for shredder blades
only and must therefore be mounted before fit‐
ting a shredder blade.
4
5
72
WARNING
The limit stop (4) is approved as a deflector for
circular saw blades only and must therefore be
mounted before fitting a circular saw blade. It is
also necessary to change the guard ring (5), see
"Mounting the Cutting Attachment" / "Mounting
Circular Saw Blades".
8.2 Mounting the Deflector
Deflectors (1 to 4) are mounted to the gearbox in
the same way.
7
6
► Remove dirt from joints on gearbox and
deflector – make sure that no dirt gets into the
screw holes in the gearbox.
► Place the deflector on the gearbox (6).
► Insert the screws (7) and tighten them down
firmly.
8 Mounting the Deflector
0458-323-8721-D