AL-KO E.C.S 12 Manual Del Usuario página 35

All manuals and user guides at all-guides.com
6.4 Fitting the control unit
foto 16
GG = 1200kg !
(>1200kg ⇒ 6.5)
foto 17:
without mounting plate:
foto 18
with mounting plate:
foto 1019:
1 2
3
Insert the connecting cables 1-4 into the
sockets provided on the rear of the control
unit.
Pay attention to the numbering.
Group excess cables at suitable places and
fasten using cable ties.
Insert the supply connection cables into the
sockets provided (see Fig. 16).
Insert the control unit and connect to the
frame.
Screw the frame tight into the wooden plate
using countersunk screws 2.5 x 16 mm and
push the protective caps in place.
Screw the mounting plate onto the caravan
wall or floor using button-headed screws.
Connect the cable as shown in Fig. 16.
Insert the E.C.S. control unit in the mounting
plate & frame and tighten using self-tapping
screws.
1 = M3 x 8 mm self-tapping screw
2 = Protective cap
3 = Button-headed screws 3.5x16mm
11