Accu-Chek Performa Instrucciones De Uso página 25

Setup
Setting the Test Reminders
NOTE
Test reminders:
• beep at the same time each day.
• beep every 2 minutes up to 3 times.
• turn off by inserting a test strip or pressing
any button.
1
Press and release
Press and release to
turn the meter on. repeatedly until the bell
symbol, OFF, set-up, and
The flashing test strip
the flashing A-1 appear
symbol appears on the
on the display.
display.
Press and hold
until
set-up appears on the
display.
Document Name: ART-07022590007
Document Number: 0000109119
Version: 1.0
This copy will not be updated. Verify the validity of this version in the appropriate electronic repository.
78120_07022590007_EN.indb 23
Meter Memory, Setup and Data Transfer
• If a test was performed within 15 minutes
of a test reminder, the test reminder does
not beep.
• If the meter is on at the test reminder time,
the test reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
• If a test reminder is off in set-up mode, any
subsequent test reminders are also off. For
example, if you set A-1 but turn off A-2, then
A-3 and A-4 will automatically be off.
2 3
or
Press and release
to switch between On
and OFF.
Press and release
set your choice.
If On is selected, the hour
flashes.
Lifecycle Status: Effective
3
4
or Press and release or
to adjust the hour.
Press and release to
to set the hour.
The minutes flash.
23
4/23/2019 1:56:40 PM
Confidential
Valid from: 02-Aug-2019
Page 25 of (180) page(s)