Husqvarna WR 250 2012 Caracteristicas - Uso - Mantenimiento página 71

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

THROTTLE CONTROL
The throttle knob (1), is located on the right hand side of the
handlebar. The position of the throttle control can be adjusted
by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (A) after
the adjustment.
FRONT BRAKE CONTROL
The brake control lever (2) is located on the right hand side of
the handlebar. The position of the throttle control can be ad-
justed by loosening the two fastenig screws .
CAUTION
Do not forget to tighten the screws (B) after
the adjustment.
MUM1_WR250-300_2012_GB.indd 13
STEERING LOCK
The motorcycle is equipped with a steering lock (1) on the R.H.
side of the steering head tube.
To lock it, procede as follows: turn the handlebar leftwards,
place the key in lock and turn counterclockwise. Push the key
inwards (if necessary, turn to and from). Turn the key clockwise
and remove it from the lock.
To unlock the steering lock, reverse the above procedure.
1
EN - 13
9-05-2011 16:52:21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wr 300 2012Wr 250 2012 usaWr 300 2012 usa

Tabla de contenido