Husqvarna WR 250 2012 Caracteristicas - Uso - Mantenimiento página 94

REMOVING THE FRONT WHEEL
Set a stand or a block under the engine and see that the front
wheel is lifted from the ground. Loosen the bolts (1) holding
the wheel axle (2) to the front
fork stanchions.
Hold the head of the wheel axle (2) in place, unscrew the bolt
(3) on the opposite side; draw the wheel axle out.
EN - 36
MUM2_WR250-300_2012_GB.indd 36
NOTES
Do not operate the front brake lever when the wheel has been
removed; this causes the caliper piston to move outwards. After
removal, lay down the wheel with brake disc on top.
1
2
1
3
9-05-2011 18:02:56