GE IM-6D Manual Del Propietario E Instalación página 12

INSTALL THE ICEMAKER FILL CUP
5
Install the icemaker fill cup
icemaker as shown.
PLUG IN THE ICEMAKER
6
Holding the icemaker in place, insert the power
cord plug into the socket, making sure that the prongs
and holes are matched. Press the plug firmly into the
socket. Lock the plug in place by clipping the restraints
onto each side of the plug. Make sure the restraints
click into place.
Installation Instructions
11
MOUNT THE ICEMAKER
7
• Lift the icemaker so the fill tube extension
fits in the fill cup opening (C). Hang the icemaker
on the two mounting screws (A).
Make sure:
• The power cord is still firmly in the socket.
opening. (Check the rear of the refrigerator to
make sure the fill tube has not been pushed out
of the back of the refrigerator.)
• The icemaker mounting screws are located in
the uppermost position of the mounting slots.
THEN TIGHTEN THE ICEMAKER MOUNTING
SCREWS SECURELY.
INSTALL THE ICE BUCKET
8
Put the ice bucket (9) in
place under the icemaker.
Make sure the icemaker
power switch is set to OFF.
ATTACH WARRANTY LABEL
9
A label (18) is provided with this kit to record the
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
KEEP THIS MANUAL
10
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
A
C
9