GE IM-6D Manual Del Propietario E Instalación página 4

Before you call for service...
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Automatic icemaker
does not work
Possible Causes
Freezer compartment too warm.
Icemaker is not turned on.
Icemaker is not plugged in
correctly.
Water line kinked.
Water supply turned off or not
connected.
Piled up cubes in the storage bin
cause the icemaker to shut off.
Water valve is not plugged in
correctly.
What To Do
After installing the kit, allow the refrigerator to completely
cool down for 24 hours. Once the compartment is cool, the
icemaker will begin ice production.
Move the icemaker
power switch to the
ON position.
Power
Switch
Check that the icemakern
cord plug is fully inserted into
the socket. See Plug in the
icemaker.
Check that the plastic water
line running from the valve
to the water tube inlet is not
kinked. See Connect the water
line. A kink in the water line will
restrict flow to the water line.
After installing the kit, make sure the house water supply to
the refrigerator has been turned on.
Level cubes by hand.
Check that the valve wire
adapter is completely
plugged onto the terminals
on the water valve. See
Attach the water valve.
GEAppliances.com
Icemaker
Feeler
Arm
(Appearance may vary)
Locking
Tabs
Clip Restraints
onto Locking
Tabs
Hook
Adhesive-backed
Fasteners for
Water Tube
Valve Terminals
Adapter