IKEA CIRKULERA Manual página 34

Before You Call
oven Problems
Problem
Poor baking results.
Flames inside oven or
smoking from oven vent.
Oven smokes excessively
when broiling.
Oven control panel beeps
and displays any F or E
code error.
Oven portion of appliance
does not operate.
34
Cause / Solution
Many factors affect baking results. Use proper oven rack position. Center food
in the oven and space pans to allow air to circulate. Preheat the oven to the
set temperature before placing food in the oven. Try adjusting the recipe's
recommended temperature or baking time.
Excessive spills in oven. Grease or food spilled onto the oven bottom or oven
cavity. Wipe up excessive spills before starting the oven. If flames or exces-
sive smoke are present when using broil, see Follow "Setting Broil" on page
21
Incorrect setting. Follow "Setting Broil" on page 21
Meat too close to the broil element or burner. Reposition the broil pan to pro-
vide proper clearance between the meat and broil element or burner. Remove
excess fat from meat. Cut remaining fatty edges to prevent curling, but do
not cut into lean.
Grease build up on oven surfaces. Regular cleaning is necessary when broil-
ing frequently. Grease or food splatters will cause excessive smoking.
Oven control has detected a fault or error condition. To clear the error, press
the OFF key on the control panel. Once the error code is cleared, try the bake
or broil function. If the F or E code error repeats, turn off the power to ap-
pliance, wait 5 minutes, and then repower the appliance. Set the clock with
correct time of day. Try the bake or broil function again. If the fault recurs,
press the OFF key to clear.
The time of day is not set. The clock must be set in order to operate the
oven. See "Setting the Time" on page 17.
Be sure the oven controls are set properly for the desired function. See "Oven
Controls" on page 17 and review instructions for the desired cooking function
in this manual or see "Entire appliance does not operate." in this checklist.
EN