Use; Description - SATA SATAjet K 1800 spray mix Instrucciones De Servicio

Operating instructions
EN
cal Data.
Connected components
■ Only use original SATA accessories and spare parts.
■ The connected hoses and lines must reliably withstand the thermal,
chemical and mechanical loads expected during operation.
■ When pressurised hoses work loose, their whip-like movements can
cause injuries. Always depressurise the hoses completely before they
are loosened.
Cleaning
■ Never use acidic or alkaline cleaning agents to clean the spray gun.
■ Never use cleaning agents based on halogenated hydrocarbon.
Point of use
■ Never use the spray gun in the vicinity of ignition sources, such as
naked flames, burning cigarettes or non-explosion-proof electrical
equipment.
■ Only use the spray gun in well ventilated rooms.
General
■ Never point the spray gun at human beings.
■ When processing materials that are hotter than > 43 °C, the corre-
sponding protective clothing must be worn.
■ Comply with the local regulations for safety, accident prevention, occu-
pational health and safety and environmental protection.
3.

Use

Intended Use
The spray gun is used to apply paints, lacquers and other sprayable me-
dia on suitable substrates.
Incorrect use
Improper use includes using in conjunction with food products or for
spraying unsuitable coating materials, such as acids or caustic solutions
as well as abrasive coating materials or coating materials containing pet-
rol.
4.

Description

The compressed air required for spraying is supplied at the compressed
air connection. The coating material is pumped to the material connection
at high pressure by a material feed pump. Actuating the trigger pulls the
paint needler tappet back and the coating material flows out of the mate-
124
SATAjet K 1800 spray mix