Hologic LOCalizer Manual Del Usuario página 8

LOCALIZER READER CONTROLS
The LOCalizer Reader contains the display and controls for the System and are located on the
front face of the instrument. The LOCalizer Reader allows the user to adjust the system's settings,
and produces signals in the form of a displayed distance in millimeters and an audible pitch that
represents the intensity of a Probe's signal.
Control/
Name
Display
Power
Probe Toggle
Display -
Distance
Output
Display -
Tag ID
Display -
Unit Indicator
6 User Manual
#04987
FIGURE 2. LOCalizer Reader Controls and Displays (described below)
Description
Turns power ON/OFF.
To switch ON, press the power button. The system performs a
self-test before it is available for use.
To switch OFF, press the ON/OFF button.
Toggles between the Loop Probe and Surgical Probe.
Displays the distance to the Tag in millimeters.
Displays the Tag ID.
Displays the unit of measurement as millimeters (mm).
Distance to Tag
Active Probe Icon
Tag ID Number
Intensity Indicator
Unit Indicator
Battery Charge
Probe Toggle
Brightness
Volume
Power On/Off