Description; Principle Of Operation; Range; Technical Details - aldes T.Flow Hygro+ Instrucción De Instalación

2. DESCRIPTION

2.1. Principle of operation

® ®
The T.Flow Hygro+/T.Flow
construction (SELF-BALANCING or HUMIDITY-CONTROLLED unidirectional CMEV).
The heat pump built into the system uses the energy contained in the extract air to produce domestic hot water up to a temperature
of 55°C (65°C with electrical boost). The hot water produced is stored in a tank.
The hot water production performances are only guaranteed if the ventilation is installed in accordance with the rules in force and by
selecting the air grilles and inlets defined for each system.
These systems are intended for individual or collective housing (no fan is fitted to the model intended for collective applications).

2.2. Range

Application
Individual houses
Collective housing
Connected T.Flow comprise an unconnected T.Flow
®
(11023386).

2.3. Technical details

Dimensions (mm)
Tank
Insulation
DHW
Anti-corrosion protection
Electrical connection
(voltage/frequency)
IP rating
Heating element
Trim
Heat pump
CMEV
Weight
* Fluorinated greenhouse gas contained within a hermetically sealed unit.
** Filter class G4 as per EN 779 and ISO Coarse 65% as per ISO 16890.
Nano solutions renew the air in new or existing dwellings, to improve air quality and protect the
Solution
CMEV Self-balancing/
Humidity-controlled
CMEV Self-balancing/
Humidity-controlled
CMEV Self-balancing/
Humidity-controlled
CMEV Self-balancing/
Humidity-controlled
(11023198, 11023394, 11023199 or 11023395) and an AldesConnect
®
T.Flow Hygro +
H 1941 x w 566 x D 573
Capacity 200 litres, enamelled steel
55 mm thick, polyurethane foam without CFC
Cold water inlet and hot water outlet connections G3/4" (dielectric connectors supplied but not mounted)
1 titanium impressed current anode + 1 magnesium starter anode
Refrigerant R513a *(PRG: 631).
Initial load: 650 g, i.e. 0.41 tCO
Heat pump use range (extract air temperature): min. 10°C to max. 35°C
Average airflow range from 49.1 to 222.8 m
Collective housing:
T.Flow Hygro+
®
T.Flow Hygro+ Individual housing: 79Kg
®
Description
B200-FAN_T.Flow Hygro+
®
(with built-in fan)
B100-FAN_T.Flow Nano
®
(with built-in fan)
B200_T.Flow Hygro+
®
(without fan)
B100_T.Flow Nano
®
(without fan)
Capacity 100 litres, enamelled steel
Service pressure 7 bar
230 V single phase/50 Hz
IPX1
Steatite 1500W
Painted steel sheet
Variable speed compressor Inverter
Refrigerant R513a *(PRG: 631).
eq. Initial load: 580g, i.e. 0.37 tCO
2
Micro-watt low-consumption fan
G4 pleated filter**
Aeraulic connections Ø160 mm
/h Average airflow range from 27.8 to 137.5 m
3
77Kg T.Flow
T.Flow
41
Code
11023198 (not connected)
11023384 (connected)
11023394 (not connected)
1123396 (connected)
11023199 (not connected)
11023385 (connected)
11023395 (not connected)
11023397 (connected)
T.Flow Nano
H 1311 x w 566 x D 582
eq.
2
Nano Collective housing: 69Kg
®
Nano Individual housing: 71Kg
®
EN
Box
TM
/h
3