Comfort Mode; Recommendations And Maintenance; Household Servicing - aldes T.Flow Hygro+ Instrucción De Instalación

6.6. Comfort/Guests Mode
Where more hot water is necessary for a given period, the hot water renewal in the tank can be speeded up for a programmed
duration.
The period for the additional comfort level demand is filled in by indicating the number "n" of days during which the hot water
requirements are increased.
Press the "MODE" button briefly to activate Comfort mode.
Press the "MODE" button over and over again until the comfort mode pictogram displays
and flashes on the left of the LCD screen.
Confirm the selection the operating mode by pressing OK.
The default number of comfort days flashes (one day).
Set the number of days requiring comfort using the "+" and "-" keys.
Comfort mode can be configured for an unlimited period by setting the number of days
on "-1".
Press the OK key to confirm.
The remaining number of comfort days and the word COMFORT displays without flashing,
indicating that the mode is running.

7. RECOMMENDATIONS AND MAINTENANCE

To maintain the performances of your T.Flow
qualified professional.
The periodic inspection must include:
• Operation of the safety unit.
• Filter state and its replacement if necessary
• Cleanliness of the condensate discharge pipe
• Cleanliness of the fan and the evaporator
• Operation of the pressure limiter to limit furring.

7.1. Household servicing

A water heater needs little household servicing by the user:
• Operate the safety unit once or twice a month to eliminate any residual build-up and ensure that the device has not
seized up.
• Check that no Alert is displayed on the screen. Refer to Paragraph 7.2 below if a "filter verification" alert appears. Refer
to Paragraph 10 and contact the fitter if an error code alarm appears.
system, we advise you to take out a maintenance contract with a trained,
®
59
GUESTS
COMFORT
and
EN