Use - aldes T.Flow Hygro+ Instrucción De Instalación

6. USE

Indication of active
component running
(heat pump in this example)
Operating mode selected:
AUTO: automatic operation
according to hot water needs
and hourly pricing structure
BOOST: when you need
to reach the temperature
setpoint as fast as possible
COMFORT/GUESTS: more
hot water needed for a
programmed duration.
HOLIDAY: operation in
CMEV only for a programmed
duration (with tank filled at
end of period).
Using the keys (home screen):
• : is used to move from one operating mode to the next. The new mode flashes
(confirm with OK to activate it).
• : is used to set the DHW setpoint on the home screen.
or
• : is used to confirm.
(pressed simultaneously): access to the user info. menu.
• and
• (pressed simultaneously): access to the advanced menu (including config. setting).
and
The USB port at the bottom of the control screen is reserved exclusively for a specific use controlled by the ALDES after-sales
service. Our warranty may be invalidated should a failure be caused by unauthorised use of this USB port.
55
Indication of filter clogging
level (info menu)
Adjustable temperature
setpoint
Quantity of hot water available
(see 6.1).
Selection buttons (see detail
below).
USB port: use exclusively
under the control of Aldes
after-sales service.
EN