Fissler vitavit premium Instrucciones De Uso Y Cuidado página 26

EN
Problem Possible cause
Steam is escaping You have selected the steam
from the pressure
cooking setting or another
regulator. setting below setting 1.
The pressure regulator is not
screwed on properly and/or
tightly.
The cooking valve seal, valve
seat seal or rolling diaphragm
are missing, defective or
incorrectly fitted.
Steam is escaping
The lid handle is loose.
from under the
lid handle (on the
Euromatic) even
though the cooking The flat gasket for the lid
indicator has already
handle fastening screw or
risen.
the O-ring for the Euromatic
are missing, defective or
incorrectly fitted.
If a large amount of steam
escapes, the Euromatic may
have responded as a safety
device. This happens when
the cooking valve is dirty or
defective.
The lid handle is
The fastening screw is not
loose.
firmly tightened.
The handles on the The handle screws are not
pot are loose.
firmly tightened.
46
Remedy
During pressureless steam
cooking, a small amount of
steam escaping is normal.
If you want to cook under
pressure with the system
closed, please select setting 1,
2 or 3 (see chapter 6).
Insert pressure regulator
correctly and tighten the bell
nut. (see chapter 8)
Replace or correctly mount the
affected seal. (see chapter 9)
Tighten the fastening screw of
the lid handle on the inside of
the lid.
Replace or correctly mount the
affected seal. (see chapter 9)
Remove and clean or replace
the pressure regulator.
(see chapter 8)
Tighten the fastening screw of
the lid handle on the inside of
the lid.
Tighten the screws with a
screwdriver.
Problem Possible cause
A lot of steam is
The sealing ring is defective.
escaping from the
edge of the lid even
though the cooking The sealing ring has
indicator has already
responded as a safety device.
risen. This happens when the
cooking valve and Euromatic
are dirty or defective.
Steam is escaping
A seal is defective.
under the round
cover cap on the lid
handle or on the
control button.
The pot is difficult to Lid handle and/or pot handle
close or the control
are not fitted correctly.
button does not pop
out when closing.
The lid handle is defective.
The sealing ring is not inserted
correctly.
The pot is not closed properly.
(Indicator in the lid handle is
on red).
The pot cannot be
The pot is still under pressure.
opened.
The Euromatic has jammed.
EN
DE
Remedy
EN
Replace the sealing ring.
(see chapter 9)
FR
Have the device checked by
ES
Fissler customer service.
IT
NL
Replace the lid handle or have
RU
it checked by Fissler customer
service.
GR
TR
Check the fastening of
KO
the handles and tighten if
necessary.
ZH
Replace the lid handle.
JA
Insert the sealing ring
correctly. (see chapter 5) PL
CZ
Close the pot properly.
(see chapter 4) (Indicator in
SR
the lid handle is on green.)
HR
Release the pressure in the
pot. (see chapter 7)
HU
Let go of the control button.
SK
Push the lid handle slightly to
the left.
SL
RO
BL
AR
47