aldes NanoAIR 50 Instrucción De Instalación página 27

Series connection of several Nano Air 50
The Nano Air need to be connected in series for synchronised control from the first Nano Air and its remote control. To connect the fans in series,
connect the control terminals with a cable, as indicated in the diagram below. Then connect the second to the third and so on.
Used shielded cable for the connection that has a wire section of at least 0.25 mm
When the fans are connected in series, the power supply to each one must be connected separately.
First ventilation unit
1~100-230 V
50/60 Hz
(not including in the delivery kit).
2
Second ventilation unit
EN
1~100-230 V
50/60 Hz
Towards next
ventilation unit
27