View Of The Nano Air 50; Mounting Plate - aldes NanoAIR 50 Instrucción De Instalación

EN

5. VIEW OF THE NANO AIR 50

Fan unit
Forms the airflow by the
rotation of the fan. Has a
decorative grille to protect it
from foreign objects
penetrating it on the room
side.
The fan unit is fitted with
automatic louvres that open
when the device is running
and closed when
disconnected to avoid
backflow.
Ori ces for the humidity sensor.
Used for the air access to the humidity sensor that controls
the humidity level in the room.
On indicator
Shows the device status.
Filter change lamp
Indicates the need to replace the filter.
IR receiver and lighting sensor
It serves to receive the signal from the remote control and assess
the lighting to activate/deactivate night mode.
22
Inner duct
Inner part of the
telescopic duct.
extract air to heat the

Mounting plate

Is used as a mounting box
to install the fan unit on
the wall and to connect
the device to the mains.
Ceramic heat Outer duct
exchanger
Outer part of the
Recovers the heat telescopic duct.
contained in the
incoming air.
Air ow recti er
Eliminates
turbulence to reduce
the sound level.
Filters the air flowing through
the device for dust and foreign
bodies and prevents the heat
exchanger from becoming
Filter
clogged.