aldes NanoAIR 50 Instrucción De Instalación página 31

Servicing the fan (once a year).
2.
1. Remove the fan unit and clean its blades.
2. Use a soft brush, rag or vacuum cleaner to remove the
dust.
3. Do not use water, abrasive detergents, solvents or
pointed objects.
4. The blades need to be cleaned once a year.
To reset the filter meter, reinsert the filters, heat exchanger and fan unit and hole the STOP button down.
Changing the battery in the wireless remote control (if necessary).
3.
1. It may be necessary to change the remote control battery when this
is used.
2. The battery needs changing when there is no reaction to pressing
the buttons on the Nano Air wireless remote control.
3. Battery type - CR2025.
4. To change the battery, remove the battery holder at the bottom of
the remote control.
5. Change the battery and reinsert the holder with the new battery.
Remove the fan unit Clean the fins
EN
+
CR2025
3V
+
CR2025
3V
31