Stokke Sleepi Guia Del Usuario página 54

AU/NZ
WARNING!
IMPORTANT, RETAIN FOR
FUTURE REFERENCE.
READ CAREFULLY!
Safe Sleep
Stokke® Sleepi™ Mini
• As soon as your baby comes home, she/he will need a safe
• WARNING – Stop using the product )Mini( as soon as
place to sleep. Pediatrics recommends that babies sleep in their
parents' room (but not the same bed) for the first six months or, the child can sit or kneel or pull itself up.
• Do not let other children play unsupervised near the Mini.
ideally, for the first year. Having a sturdy, secure crib or bassinet
for baby is essential. • Make sure the wheels on the Mini is in locked position
when a child is in it..
• To reduce the risk of SIDS (Sudden Infant Death Syndrome),
pediatricians recommend healthy infants be placed on their
Stokke® Sleepi™ Bed
backs to sleep, unless otherwise advised by your physician, a
firm mattress with a tight-fitting sheet will be needed as well. • The mattress base can be adjusted to two different
positions. Ensure the distance from the mattress to the
• Keep soft objects and loose bedding away from the infant's
sleep area to reduce the risk of SIDS, suffocation, entrapment, top of the bed is always at least 30 cm in the highest
position and at least 50 cm in the lowest position. This
and strangulation.
Stokke recommends following The American Academy of Pediatrics level is marked at the cot end ) (. An original mattress
from Stokke ensures a high quality fit.
recommandations for safe infant sleeping environments: www.
healthychildren.org • The lowest position is the safest and that the base
should always be used in that position as soon as the
Cleaning and maintenance baby is old enough to sit up;
• Make sure to keep medication, string, elastic, small
Stokke® Sleepi™ Mattress (sold separately):
• MATTRESS COVER: Washable at 60°C / 140°F. Stretch while toys or small items such as money out of reach from
any position in the cot.
wet. Do not tumble dry. Dry flat.
• Mattress core: Rinse mattress core with warm water and dry • To prevent injuries from falls when your child can climb
in and out of the bed by itself, you shall no longer use
flat. If your child has an accident, the mattress cover and core
should always be washed. the Sleepi™ Bed as a cot. When your child is ready,
you may remove one side of the cot and adjust the
WOOD:
• Wipe with a clean, damp cloth, wipe off excess water. Stokke mattress base to the lowest position. Once the cot side
is removed, ensure to also disassemble the wheels.
does not recommend any use of detergents. The colour of the
wood may change if exposed to sun.
NORMAL USE:
• Always remove the duvet in the morning and let the bed and
duvet "cool down" and dry up.
• Possible strangulation or entanglement hazard. Never use crib
mattress cover unless it fits securely on crib mattress and wraps
around the mattress corners.
• This mattress may not soak up vomit.
104 | Stokke® Sleepi™
• Keep the instructions for later use. Save the hex key
WARNING!
for later use. Re-tighten all screws 2-3 weeks after
assembly, and re-tighten regularly.
TO PREVENT FALLS,
• When assembling the product, do not tighten the
screws until the whole unit is assembled. Doing this
THE MATTRESS BASE OF
ensures you the easiest way to assemble.
• Make sure the Stokke® Sleepi™ is placed on a level and
THIS COT SHOULD BE AD-
stable surface. After assembly, re-check and tighten
all fittings and screws. Fittings and screws should
JUSTED TO THE LOWEST
be checked regularly and retightened as necessary.
Loose screw connections or parts could lead to the
POSITION BEFORE THE
baby trapping a body part, or clothing )e.g. strings,
necklaces, ribbons for babies' dummies, etc.( which
CHILD CAN SIT UP.
would pose a risk of strangulation.
• Never place the Stokke® Sleepi™ by an open fire or
Recommended mattress size
sources of strong heat such as electric bar fires, gas
This product has been manufactured for use with a fires, etc. due to the risk of fire.
mattress which measures 698 mm wide by 1364 mm • Do not use the Stokke® Sleepi™ if any part is broken,
long and 84 mm in thickness for Stokke® Sleepi™ torn or missing, and use only spareparts approved
Bed and 590 mm wide by 764 mm long and 84 mm by Stokke®.
in thickness for Stokke® Sleepi™ Mini, and have the • Do not use any accessories or replacement parts not man-
shape of the Bed/Mini. The width and length is spec- ufactured by Stokke®, this may affect your child's safety.
ified because it is important that the gaps between • Placing additional items in the product may cause
the mattress and the sides and ends of the cot will not suffocation.
exceed 30 mm. This is to minimize the risk of a child • Do not leave anything in the cot or place the cot close
getting entrapped between the side and the mattress. to another product, which could provide a foothold
The thickness of the mattress is specific to ensure that or present a danger of suffocation or strangulation,
the depth of the cot is greater than 500 mm with the e.g. strings, blind/curtain cords
mattress base in the lowest position to minimize the • Do not use more than one mattress in the
risk of a child climbing or falling out of the product. Stokke® Sleepi™
• This product is only intended for use with 1 child at the time.
Information about your new Stokke® Sleepi™
• Never use plastic shipping bags or other plastic film as
Mini Mattress and Stokke® Sleepi™ Bed Mattress
mattress covers not sold and intended for that purpose.
(sold separately)
They can cause suffocation.
• Make sure the single mesh side of the mattress is facing • Never use a water mattress with this product.
downwards • If refinishing, use a non-toxic finish specified for chil-
dren's products.
• Ensure the cot is placed at a reasonable distance from
WARNING!
curtains, blinds, heaters and power points.
• Make sure to keep medication, string, elastic, small
• Do not use this product without reading the instruc- toys or small items such as money out of reach from
tions for use first. any position in the cot.
• Read these instructions carefully and follow them in
WARNING for Juvenile configuration (open bed)
detail to ensure that the safety features of the Mini
and Bed is not compromised. • When your child is old enough, the side of the Sleepi
bed may be removed for your child to enter and exit
the Sleepi bed on their own. A sign of the child being
ready for this is when he or she starts climbing out of
the bed on their own.
• Do not use the Sleepi Bed with the side removed next
to an adult bed. This product is not a co-sleeper.
• Children are likely to play, bounce and jump in their
sleeping area. Therefore, ensure the Sleepi bed is placed
away from furniture, windows, blind cords, curtain
pulls or other strings or cords. Either place the Sleepi
bed right up to a wall, or ensure there is a 300mm / 12
inches gap between the wall and the side of the bed.
WARNING WARNING Stokke® Sleepi™ | 105