Cleaning And Maintenance; Cleaning And Care; Maintenance; Decommissioning - Bosch rexroth 3 842 998 350 Manual De Instrucciones

68/78

Cleaning and maintenance

Bosch Rexroth AG, MPS: HEAP, 3 842 555 612/2019-01
11 Cleaning and maintenance
Electrical current
Electric shock caused by touching live parts.
„ Switch off the power supply before cleaning and maintenance.
Secure against restart.
„

11.1 Cleaning and care

Cleaning agents and other liquids
Damage to components
Close all openings with suitable protective devices so that no cleaning agent can
„
penetrate into the system.
Never use solvents or corrosive cleaning agents. Only clean the product with
„
a damp, lint-free cloth.
Only clean with water and, if necessary, a mild cleaning agent. Do not use
„
a pressure washer for cleaning.

11.2 Maintenance

Please observe the general safety instructions for electrotechnical installation of
MPS components, 3 842 358 820.
Carry out the function test of the RCD switch regularly.
The height-adjustable workstation requires little maintenance. However, regular
checks of the safety devices, cables, hoses, plug and screwed connections for
damage and function are necessary.
Warning and error messages, see chapter 17 "Troubleshooting and repair".

12 Decommissioning

No special work steps are required to shut down the
HEAP. Therefore, this chapter does not contain any information on the topic.
Chapter 13 "Disassembly" explains how you can dismantle your HEAP.
Observe the instructions in chapter 7 "Transport and storage" when
transporting or disassembling the HEAP.
WARNING
NOTICE