Replacement Of Parts; Use And Functioning; Description Of Controls; Functionality - Diamond AP1CH/F86-R2 Manual De Instalación, Uso Y Mantenimiento

ENGLISH
4.5.

Replacement of Parts

!
Before carrying out any replacement
intervention,
devices.

In particular, deactivate the electrical power
supply using the differential disconnecting switch.
When worn components must be replaced, only
use original spare parts.
GB
5.

USE AND FUNCTIONING

5.1. Description of Controls

1 2
On/Off key (1)
Pressing the ON/OFF key leads to the controller
switching-on. Pressing for 5 consecutive seconds
switches the controller off (see par. 6.4.1).
ENTER key (2)
Pressing during normal functioning allows to
select the display of:
 DATE – TIME
 COMPRESSOR
TEMPERATURE (see par. 6.4.2)
Pressing within a menu confirms the selection
made.
Menu selection key (3)
Pressing during normal functioning allows to
access available
Moreover, pressing the key for 5 seconds

5.2. Functionality

activate all envisioned
3 4 5
STATUS –
menus (see par.6.4.5).

All responsibility is declined for injury to
persons or damage to components deriving from
safety
the use
interventions which could modify the safety
requisites,
manufacturer.
consecutively blocks entry to the menus; repeat
the reverse procedure to re-enable entry to the
menus.
These keys are not operational in the main
display. In menu selection they scroll the various
menus, in parameters and humidity setpoint
6
programming they decrease or increase the
selected value.
AUX key (6)
Pressing during normal functioning allows to
access the light switch-on control, only enabled in
models with glass door (see par. 6.4.4).
Pressing for 5 seconds during normal functioning
allows to activate the "LOAD CELL" function (see
par. 6.4.3)
IRDA
INFRA-RED port for downloading data
With the optional kit formed by remote control +
CELL
INFRA-RED serial port + software, it is possible to
periodically download the data contained in the
controller in order to file it in electronic format in a
PC. By means of the software it is possible to
directly elaborate the data in graphical format and
table format, print it and export it to other formats.
6
of non-original spare
without authorisation
Increase/Decrease keys (4/5)
parts and
of the