Diamond AP1CH/F86-R2 Manual De Instalación, Uso Y Mantenimiento página 35

ENGLISH
Programs selection menu

Menu 4
Programs
HACCP alarms display menu

Menu 5
Faults display menu

Menu 6
Failures
Start printing

GB
Menu 7
Settings menu

Menu 8
Set Up
Service menu

Set Up 01
Service
Language selection menu
Set Up 02
Language
Clock setting menu

Set Up 03
Clock Setting
Inputs/outputs display menu

Set Up 04
Inputs/outputs
Menu 01: Change Setpoint
If in Menu 01 the
setpoint variation mode.
The set cannot go beyond the limits established
by the manufacturer for that given model. Using
the and
the value of the current setpoint. On selection of
the new value, press the
value set. Press the
back to the initial screen.
Menu 02: Change Humidity
If the key is pressed in Menu 02, the humidity
modification mode is entered (function that can
only be set in positive temperature ventilated
versions).
HACCP
Print
key is pressed, enter the
keys it will be possible to change
key to confirm the
key several times to go
Using the and
change the relative humidity value. On selection
of the new humidity value, press the
memorise the value set. Press the
several times to go back to the initial screen.
Message shown on LCD:

New Set:
Current:
Menu 03: Defrosting
If the key is pressed in Menu 03, manual
defrosting can be activated.
By pressing the
defrosting is not carried out;
By pressing the
Message shown on LCD:

Start Defrost?
No
Message with defrosting active:
Room
Defrost
Menu 04: Programs Selection
P15
P16
CHOCOLATE
P17
ICE CREAM
If in Menu 04 the
programs selection mode.
The first program displayed is the operational one,
the others can be selected using the
keys.
Press the key to confirm the selection
Press the key to go back to the Main Menu.
The confirmation of the program selection causes
the re-start of the controller to allow to load the
data relative to the program.
Notes: the setting of the functioning parameters
given by the manufacturer enables the programs
that can be selected for that given model. The
various programs are different due to setpoint and
humidity settings and cannot be changed.
The programs list is available in the attachments.
8
keys it is possible to
key to
75%
70%
key, exit the menu and
key defrosting is engaged.
Ok
-17.5°C
Set 4°C
PASTRY
Set 12°C
Set -17°C
key is pressed, enter the
and
key