Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Do not cut the cardboard with sharp tools in order
to
prevent
underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
For
any
anomalies,
immediately.
8.2.
Installation
All the installation phases must be considered,
GB
from the moment of creation of the general plan.
The installation area must be equipped with all
power supply and production residue drainage
connections and must be suitably lit and respect
current laws regarding hygiene and sanitary
requirements.
To optimise consumption and reduce wear of the
machine, do not position it in the vicinity of heat
sources or in environments where temperatures
are too high.
Proceed with machine levelling, adjusting the
individual feet.
!
ATTENTION: the appliance requires the minimum functioning spaces as shown in the diagram.
damage
to
the
steel
connect
the
!
panels
Packaging
polystyrene foam, staples ...) must not be left
within reach of children.
Remove the protective PVC film from the internal
and external walls, avoiding the use of metal
tools.
dealer
!
This appliance can only be installed and
operate
in
ventilated, in order to guarantee correct operation.
Connect and leave for a certain period of
time
(at
functioning. During transport it is probable that the
compressor
refrigerant circuit blocking the capillary: as a
consequence the appliance will function for a
certain period of time without producing cold until
the oil has returned to the
18
elements
(nylon
rooms
which
are
least
2
hours)
before
lubricant
oil
has
entered
compressor.
bags,
permanently
checking
the
Publicidad
Tabla de contenido
