GASPARDO NINA Empleo Y Mantenimiento página 28

ENGLISH
1.0 INTRODUCTION
This booklet describes the regulations for use, maintenance for
seeding machine.
This booklet is an integrating part of the product, and must be
kept in a safe place for consultation during the whole life span of
the machine.
ATTENTION
• The Manufacturer reserves the right to change the machine
without having to promptly update this manual. In the event
of disputes, the valid version is the Italian text.
• The machine was manufactured for dosing and distributing com-
mercial seeds of standard quality.
• The machine was designed for professional skilled operators
who are the only ones qualifi ed for operating it.
• Minors, illiterates and persons under altered physical or psycho-
logical conditions must not be allowed to operate the machine.
• Operators who do not have a suitable driving license, or who are
not properly informed and trained, must not be allowed to operate
the machine.
• The operator must check that the machine operates correctly,
and must replace and repair parts subject to wear that may cause
damage.
• The customer should instruct personnel on accident risks, on the
operator safety devices provided, on noise emission risks and
on general accident prevention regulations provided for by the
international directives and by the law in the country in which the
machines are used.
• In any case, the machine should be used exclusively by skilled
operators who will be held to follow scrupulously the technical
and accident-prevention instructions in this manual.
• It is the user's responsibility to check that the machine is opera-
ted only in optimum conditions of safety for people, animals and
property.
28
1.1 GUARANTEE
The guarantee is valid for a year, against all defects of material,
from the date of delivery of the equipment.
On delivery, check that the equipment has not been damaged du-
ring transport and that the accessories are integral and complete.
POSSIBLE CLAIMS MUST BE PRESENTED IN WRITING WITHIN
EIGHT DAYS OF RECEIPT.
The purchaser will enforce his rights on the guarantee only when
he has respected the conditions concerning the benefi t of the
guarantee, set out in the supply contract.
1.1.1 EXPIRY OF GUARANTEE
Besides what has already been set out in the supply contract,
the guarantee expires:
- If the limits set out in the technical data table are overshot.
- If the instructions set out in this booklet have not been carefully
followed.
- If the equipment is used badly, defective maintenance or other
errors by the client.
- If modifi cations have been carried out without written authorization
of the manufacturer and if non original spare parts have been
used.

cod. G19502553