Jøtul F 263 Instrucciones Para Instalación página 11

Fig. 20
1. Lift the rear plate (Fig. 20 A) and slide it down between
the soapstone side panels (Fig. 20 B).
Fig. 21
1. Lower the rear plate (Fig. 21 A) onto the bolts (Fig. 21 B).
2. Mount nuts from inside of the base (Fig. 21 C).
Fig. 22
1. Place the top plate (Fig. 22 A), air grate (Fig. 22 B) and
bowl (Fig. 22 C).
A
B
C
B
A
C
B
A
If soapstone top:
Fig. 23
1. Place the soapstone top (Fig. 23 A) on the guiding warts
(Fig. 23 B).
2. Place the steel cover (Fig. 23 C).
4.6 Control of functions
When the product is set up, always check the control functions.
These shall move easily and function satisfactorily.
The product is equipped with one handle. This handle controls
both the ignition vent and the air vent.
• Pulled out completely (the label visible): Ignition.
• Pushed in (the label not visible): Air vent.
ENGLISH
C
A
B
11