Jøtul F 263 Instrucciones Para Instalación página 8

ENGLISH
Fig. 5
B
A
1. Lift the baffl e (Fig. 5 A) up carefully.
2. Remove one of the side burn plates by lifting them up a little
and then out. (Be aware if using tools, that vermiculite plates
may be damaged by rough handling).
3. Remove the baffl e.
4. Remove the other side burn plate.
5. Remove the exhaust defl ectors (Fig. 5 B).
Fig. 6
B
1. Unscrew the screws (Fig. 6 A) and remove the smoke outlet
(Fig. 6 B) from the inside of the burn chamber.
Fig. 7
1. Unscrew the screws (Fig. 7 C) and remove the cover (Fig. 7 B)
from the rear outlet from the inside of the burn chamber.
8
A
B C
A
Fig 8
A
1. Knock out the removable covers (Fig. 8 A).
2. Attach the smoke outlet (Fig. 7 A) on the inside of the burn
chamber where the cover was.
3. Install the cover (Fig. 7 B) where the smoke outlet was.
4. Refi t the exhaust defl ectors (Fig. 5 B) and the baffl e plate
(Fig. 5 A).
Fig. 9
A
B
1. Place the gasket (Fig. 9 A) from the bag of screws around
the edge of the fl ue pipe and push it into the smoke outlet
(Fig. 9 B).