Publicidad
Idiomas disponibles
Idiomas disponibles
Be aware of the fact that it is particularly important that
connections have a certain fl exibility in order to prevent
movement in the installation leading to cracks. A correct and
sealed connection is very important for the proper functioning
of the product.
Chimney draught; See «2.0 Technical data». If the draught is
too strong you can install and operate a fl ue damper to control
the draught.
4.2 Selfclosing doormechanism
The product is delivered with a selfclosing doormechanism. If
wanted this can be removed.
Fig. 3
2X
Fig. 3a
1. Unscrew the screw and nut (Fig. 3 A).
2. Unhook and remove the spring.
A
4.3 Leveling the fi replace
Fig. 3b
4.4 Fitting the fl ue pipe with the rear
outlet
The product is supplied from the factory with the smoke outlet
fi tted for the top outlet.
NB! Proceed as follows for installation with a rear outlet:
Fig. 4
When installing with soapstone side panels, the rear plate (Fig.
4 B) has to be prepared before the product is placed on its fi nal
position.
1.
Knock out the removable cover plate (Fig. 4 A) in the rear
plate (Fig. 4 B).
2.
Hang the rear plate gently on the fl ue pipe (Fig. 4 C).
3.
Place the product in the correct position. (See Fig. 1a).
ENGLISH
A
C
B
7
Publicidad
