GASPARDO NINA Empleo Y Mantenimiento página 30

ENGLISH
1.3 TECHNICAL DATA
Work width
Max. row number with shoes
Max. row number with Corex disc
Row distance with shoes
Row distance with Corex disc
Seed hopper capacity
Power required
Weight with shoes
Weight with Corex disc
Tyres
The technical data and the models provided must be considered as non binding. We reserve the right to change them without
notice.
1.4 IDENTIFICATION
Each individual machine has an identification plate (Fig. 1)
indicating the following details:
1) Mark and address of the Manufacturer;
2) Type and model of machine;
3) Unloaded mass, in Kilograms;
4) Mass full load, in Kilograms;
5) Registration of the machine;
6) Year of manufacture;
7) CE mark.
You are advised to note down your data on the form below, along
with the date of purchase (8) and the dealer's name (9).
8) ____________________
9) ____________________
This information must always be quoted whenever assistance
or spare parts are needed.
(2)
(3)
(5)
(7)
fig. 1
30
USE AND MAINTENANCE
(1)
(4)
(6)
g
NINA 250
U.M.
m (feet) 2,50 (8)
nr.
nr.
cm (inch)
cm (inch)
l.
HP (KW) 60 (44)
Kg (lb) 510 (0000)
Kg (lb) 600 (0000)
(bar-Psi) max. 6.00 - 16 (bar-Psi)
1.5 HANDLING
If the machine is handled, it must be lifted by hooking (Fig. 2)
onto the appropriate holes with a suitable winch or crane of
sufficient capacity. Because of the danger involved, this operation
should be carried out by trained and responsible personnel. The
mass of the machine is on the identification Plate (Fig. 1).
Stretch the rope to keep the machine level.
The hook points can be detected by finding the «hook» symbol
(11 Fig. 4).
fig. 2
NINA 300
3,00 (9)
21
21
12 (00)
12 (00)
400
595 (0000)
700 (0000)
6.00 - 16 (bar-Psi)
cod. G19502550
25
25
510
70 (51)