GYS POT COMBI ARCPULL Manual De Instrucciones página 39

Operating manual
ERROR MESSAGE, DEFECTS, CAUSES SOLUTIONS
This device has a fault monitoring system. In the event of a fault, error messages may be displayed.
Error code
Generator thermal
OVERHEATING DEFECT
SECTOR DEFECT
PRESSED KEY
Communication fault
COM. DEFECT
Gun thermal protec-
OVERHEATING DEFECT
Wired temperature
MOTOR DEFECT
Note : All operations requiring the removal of the machine's cover and checking the electrical systems must be done by
a qualified technician.
Steel function
The right-hand side of the product is used for the following bodywork operations:
- dent removal work,
- welding of nails, rivets, washers, studs and mouldings,
- removal of impacts,
- sheet metal retensioning.
It is not designed for the assembly of metal parts.
Delivered with the following steel accessories:
Earth clamp
Original manual
Meaning
Maximum duty cycle
protection
Mains power is out of
Mains voltage
range or one phase is
default.
A key on the keypad is
Keypad fault pushed when the machine
is switched on.
Communication between
the gun and the power
with the gun
source is not working.
Maximum duty cycle
tion.
The temperature sensor is
sensor fault.
Gun with trigger
Causes
Wait for the indicator to turn off before
reached.
Have your electrical installation checked
by a qualified person. Reminder: the unit
is designed to operate on a single-phase
missing.
Ask a qualified person to check the key-
Reconnect the gun and switch the ma-
chine back on. If the fault remains, ask a
qualified person to check the product.
Wait for the indicator to turn off before
reached.
disconnected.
Inertia hammer
short 1,1kg
GYSPOT COMBI ARCPULL
Solutions
resuming welding operations.
110-240 Vac 50/60 Hz mains supply
pad.
resuming welding operations.
Have the keypad checked by a
qualified person.
Accessories and consumables box
39