Graf oneAdvanced Manual De Instalación página 12

2 Final assembly and installation of oneAdvanced 3–9 PE
13.
Depending on tank size, the lifter length must be
adapted by moving the lifter foot. The approxi-
mate position is stated on the lifter. The exact
height should be determined in the tank.
15.
–
Press lifter into sampling unit (until it engages)
17.
The lifter is placed from above in the profile to
hold the dividing baffle.
2700
4800
6500
Assemble lifter and sampling unit by pressing lift-
er's outlet into sampling unit's hole.
Insert lifter with sampling unit in tank.
The sampling unit's outlet connector is placed into
the outlet pipe's socket (use lubricant!). The socket
connection should be secured with a Spax screw.
12 / 144
14.
16.
18.