Publicidad
Idiomas disponibles
Idiomas disponibles
3 Final assembly and installation of oneAdvanced 10–14 PE
3.4
Fitting the installation kit
3.4.1
Final assembly of the ventilation system
Carefully screw the disc aerator by hand
into its thread.
Please note that all threads must be
wrapped with Teflon tape.
3.4.2
Assembling the drain baffle
The provided drain baffle must be at-
tached to the outlet pipe. In the event of
damage, this prevents sludge from wash-
ing out of the system.
The outlet from the blue sample must be
introduced from above into the drain baf-
fle. The outlet pipe may have to be short-
ened.
3.4.3
Mounting the aeration equipment on the installation kit.
The aeration equipment is mounted on the installation kit. This involves attaching the stainless steel
downpipe between the mounts on the blue lifter and securing it with the fixing bracket.
Disc aerator
Assembling the disc aerator
18 / 144
Tighten the plastic
thread hand-tight
Publicidad
