Figure 60: Setting a Frequency to
"Currently Available" Status
To switch to a "Currently Available" frequency that is not yet
"Checked-Active", press the Menu Key
the desired frequency; if it is not checked, press the Select Key to
toggle the checkbox to "checked". This sets the status of that fre-
quency to "Checked-Active". Press the Menu Key to return to the
operating display, which will now be set to the frequency just
activated. The SR-60 will show the chosen frequency and its icon
on the left of the screen.
Selected frequencies in the Checked-Active set can be switched
while the SR-60 is in use, by pressing the Frequency Key. The
SR-60 will cycle down the list through the set of active frequen-
cies from low to high, group by group, and repeat. Unchecking a
frequency in the Main Menu will deactivate it, and it will then not
appear when pressing the Frequency Key.
Note: If a frequency appears missing, look to make sure it
is currently available in the Main Menu frequencies list. If it
is, select it using the Select Key. If not, go to the Frequency
Selection menu and the appropriate sub-category and
select it there, checking the box to make it "Currently
Available" and bring it into the Main Menu list. Make sure
it is "checked" at both menu levels for it to appear in the
current working set of frequencies.
Information Screen and Restoring Defaults
Information Screen
The information screen appears at the bottom of the menus
choices list. Pressing the Select Key displays information about
your locator, including software version, serial number of the re-
ceiver, and its calibration date (Figure 61).
Restore Factory Defaults
Pressing Select a second time will display the Restore Factory
and scroll down to
Defaults option. (See Figure 62.)
Use the Up and Down Keys to highlight either the "check" sym-
bol to restore factory defaults, or the "X" symbol to NOT restore
them.
Pressing the Menu Key without changing either checkbox will
exit the option and leave things as they were.
Ridge Tool Company
SeekTech SR-60
Figure 61: Information Screen
Figure 62: Restore Defaults Option
Figure 63: Defaults Restored
(Line Trace Mode)
35