Interpump Group SS71 Manual De Uso Y Mantenimiento página 45

18 DECLARATION OF INCORPORATION
The manufacturer INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 - S. ILARIO D'ENZA (RE) - Italy DECLARES that the
product identified and described as follows:
Designation: Pump
Type: Reciprocating plunger pump for high pressure water
Trademark: INTERPUMP GROUP
Model: SS7193 – SS71106 – SS71153 – SS71170 – SS71170-F – SN71106-F – SN71153-F
SN71170-F – SN7193 – SN71106 – SN71153 – SN71170 – SW71170 – SWS71170
Is found to comply with the Machinery Directive 2006/42/EC
Standards applied: UNI EN ISO 12100 - UNI EN 809
The pump identified above meets the following essential safety and health protection requirements as listed in section 1 of
Annex I of the Machinery Directive:
1.1.1 - 1.1.2 – 1.1.3 – 1.1.5 – 1.1.6 - 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 – 1.7.4.2 and the relevant
technical documentation has been compiled in accordance with Annex VII B.
In addition, following a motivated request the manufacturer undertakes to provide a copy of the relevant pump technical
documentation in the manner and terms to be defined.
The pump must not be commissioned until the plant in which it is to be incorporated has been declared in to be in compliance
with the provisions of the relevant directives and/or standards.
Person authorized to compile the technical file
Person authorized to draw up the declaration:
Reggio Emilia – 02 / 2022
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/EC)
Name: Roberto Menozzi
Address: INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 -
42049 - S. ILARIO D'ENZA (RE) - Italy
Ing. Silvio Corrias
45