SWM SIX6 500 Manual De Instrucciones página 15

COMBINED INSTRUMENT
WARNING AND SIGNALLING LIGHTS
1) Turning indicator light.
2) High-beam light
3) Neutral warning light
4) Engine failure warning light
5) Fuel reserve warning light
6) ABS warning light
3
6
4
1 2
5
TURNING INDICATOR LIGHT " "
The light flashes when activating the left or right hand turning indicator using
the control lever on the left-hand switch.
HIGH-BEAM LIGHT " "
The light comes on when activating the high-beam light using the control on the
left-hand switch.
NEUTRAL WARNING LIGHT " "
The light comes on when the gear shift lever is in neutral position (no gear
engaged).
ENGINE FAILURE WARNING LIGHT "
When the ignition key is turned, the engine control unit runs a self-test, the light
comes on for a few seconds and then goes off if no fault is found.
If the light comes on while the engine is running, it means that there is an engine
or injection system failure.
- Stop and turn off the engine.
- Wait a few minutes and restart the engine; if the light comes on again, contact
your nearest SWM dealer to have the self-test system checked.
SIX DAYS
"
15 -
EN