SIX DAYS
No.
System or component
14
15
Fuel Pump Relay (FPR)
16
17
Front Oxygen Sensor
18
19
ECU Read-Only Memory
20
1st Cylinder Injector
21
22
Intake Pressure
23
Manifold Absolute Pressure
Sensor (MAP)
24
25
Intake Pressure Sensor
26
27
Intake Temperature Sensor P0114
28
Intake Air Temperature
29
Sensor (IAT)
30
Intake Temperature Sensor P0111
31
MIL
18 -
EN
Error code
Error description
P00D1
Front oxygen sensor heating circuit low current
P0232
FPR Coil Circuit High Voltage
P0231
FPR Coil Circuit Low Voltage or Open
P014D
Slow response of front oxygen sensor from thin to thick Check if the front oxygen sensor is connected effectively.
P014C
Slow response of front oxygen sensor from thick to thin
P0601
ECM ROM validation error
P0262
1st cylinder injector short circuit to high voltage
P0261
1st cylinder injector short circuit to low voltage/open
circuit
P3106
Low intake pressure in steady state
P0108
MAP Circuit High Voltage
P0107
MAP Circuit Low Voltage or Open
P0105
Intake pressure sensor signal
P0109
Intake pressure sensor signal error fluctuation
Intake temperature sensor signal error fluctuation
P0113
IAT Circuit High Voltage or Open
P0112
IAT Circuit Low Voltage
Intake temperature sensor signal stuck
P0650
MIL Circuit Malfunction
Driver behavior
Check if the front oxygen sensor is connected effectively.
If the error still persists ask for assistance.
Check if the fuel pump relay is connected effectively. If
the error still persists ask for assistance.
If the error still persists ask for assistance.
Remove ECM and plug again. If the error still persists
ask for assistance.
Check if the front oxygen sensor is connected effectively.
If the error still persists ask for assistance.
Check if the intake mainfold pressure sensor is
connected effectively. If the error still persists ask for
assistance.
Check if the intake air temperature sensor is connected
effectively. If the error still persists ask for assistance.
Check if there's history error. Reset. If the error still
persists ask for assistance.