SWM SIX6 500 Manual De Instrucciones página 26

SIX DAYS
SIDE STAND
A side stand (1) is supplied with every motorcycle.
Periodically check the side stand (see "Scheduled
Maintenance Chart"); make sure that the springs are
not damaged and the side stand moves freely. If the
side stand is noisy, lubricate the fastening pivot (A).
a
WARNING
The stand is designed to support the
WEIGHT of the MOTORCYCLE ONLY. Do
not sit astride the motorcycle using the
stand for support as this could cause
structural failure to the stand resulting
in serious injury.
a
WARNING
The motorcycle must be placed on its
side stand ONLY AFTER the rider has
dismounted. Once the motorbike has
been brought from its rest position on
the ground to vertical position, the rider
has to raise the stand from the lowered
to the raised position with his/her left
foot.
26 -
EN
a
WARNING
A safety sensor (2) is fitted on the
motorbike, which allows starting it
with the stand lowered and the gear in
neutral. If a gear is engaged with the
stand lowered, the engine turns off.
1
2
A