SWM SIX6 500 Manual De Instrucciones página 47

SIX DAYS
CLUTCH ADJUSTMENT
Normally, the clutch is adjusted by only stretching
the cable using the adjusting unit positioned on the
handlebar. As a rule, it is sufficient to operate on the
handlebar adjuster to restore the clearance due to
the flexible transmission stretch.
The control lever must always have a free play
(C) (about 3 mm) before starting to disengage the
clutch. To adjust this play, loosen the lock nut (2)
and operate on the adjuster (3) after removing the
rubber cap (1); turn the adjuster in the direction
indicated by arrow A to reduce play (C), turn it in
the direction indicated by arrow B to increase play.
The adjustment can also be carried out through
the tensioner (4) on the right side of the frame. If
the clutch slips under load or drags in disengaged
position after play has been adjusted, it must be
taken apart for inspection.
For this operation, please contact a Dealer.
47 -
EN