SWM SIX6 500 Manual De Instrucciones página 42

SIX DAYS
BRAKE DISC WEAR
Measure the thickness of each disc in the point of
maximum wear. Replace the disc if it wear exceeds
the limit provided.
DISC STANDARD
FRONT 3.5 mm
REAR 4 mm
42 -
EN
COMBINED BRAKING PEDAL POSITION
ADJUSTMENT
The position of the rear brake pedal with respect
to the footrest may be adjusted according to the
individual needs.
To adjust, proceed as follows.
SERVICE LIMIT
- Loosen the nut (1);
3.0mm
- Act on the screw (2) to adjust the pedal position (3).
3.5 mm
Once this adjustment is completed, adjust the free
play of the pedal as follows.
REAR BRAKE PEDAL FREE PLAY ADJUSTMENT
The combined braking pedal (3) must have a free
play (B) of 3 mm before the braking action starts.
Should this not happen, adjust as follows:
- loosen nut (4);
- operate the pump rod (5) to increase or decrease
the free play;
- tighten nut (4) at the end of the operation.
2
1
a
B
WARNING
In the absence of the required free
play, the brake pads will rapidly wear,
resulting in the risk of TOTAL BRAKE
INEFFICIENCY or rear brake lock.
3