Publicidad
Idiomas disponibles
Idiomas disponibles
Keep the appliance at peak effi ciency by car-
rying out the scheduled servicing procedures
recommended by the manufacturer.Proper ser-
vicing will allow the best performance, a longer
working life and constant maintenance of safety
requirements.
Important
Before carrying out any servicing procedure,
activate all the safety devices provided and
decide whether staff at work and those in the
vicinity should be informed.
In particular, turn off the electricity supply us-
ing the circuit-breaker and prevent access to
all devices which might people's health and
safety at risk if activated.
HANDLING AND INSTALLATION
INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION
Important
When handling and installing the appliance
comply with the information provided by the
GB
manufacturer directly on the packaging, on
the appliance and in the instructions for use.
The packaging is designed to reduce space and
as appropriate to the type of transport used.To
simplify transport, some components may be
removed and suitably protected and packed for
transport.
The packaging carries all information necessary
for loading and unloading.
When unpacking, check that all components are
present in the correct quantities and are unda-
maged.
The packaging material must be properly dispo-
sed of in accordance with legal requirements.
3320140_inst_GB_rev.1
SERVICING
INSTRUCTIONS AND WARNINGS FOR SERVICING
PACKAGING AND UNPACKING
Also make sure that during the maintenance
procedure, that the operator is always able to
check whether the plug is disconnected from
the power outlet.
– Every 100 working hours have skilled,
authorised personnel carry out the following
operations:
– Check that the safety thermostat is working
correctly.
– Check that the electrical system is in good
working order.
All handling and installation operations
should be carried out in accordance with cur-
rent legislation on health and safety at work.
- 6 -
ENGLISH
Publicidad
