Publicidad
Idiomas disponibles
Idiomas disponibles
Important
Before it is put into service, the system must
be tested to check the operating conditions
of every single component and identify any
malfunctions. In this stage, it is important to
check that all health and safety requirements
have been complied with in full.
To test the system, make the following checks.
GB
Important
Before making any type of adjustment, acti-
vate all the safety devices provided and deci-
de whether staff at work and those in the vi-
cinity should be informed.
In particular, turn off the water supply tap,
cut off the steam supply and prevent access
to all devices that might cause unexpected
health and safety hazards if turned on.
3320140_inst_GB_rev.1
TESTING OF THE APPLIANCE
ADJUSTMENTS
INSTRUCTIONS AND WARNINGS FOR ADJUSTMENTS
Check that the mains voltage is the same as
1)
that of the appliance.
Operate the appliance's circuit-breaker ??1 to
2)
check the electrical connection.
Check that the safety device is operating
3)
correctly.
After testing, if necessary instruct the user in all
the skills necessary for putting the appliance
into operation in conditions of safety, in accor-
dance with legal requirements.
Caution - Warning
Adjustments must be carried out by authori-
sed, qualifi ed staff , in accordance with the re-
levant legal requirements.
- 12 -
ENGLISH
Publicidad
