Angelo Po 1N1PI1E Manual De Uso página 28

To carry out this operation, proceed as follows
Turn on the tap (A).
1)
Unscrew the cap (B).
2)
Turn the water spout (C) towards the fi ller
3)
connection (D).
Turn on the taps (E) to fi ll the jacket.
4)
When water starts to fl ow from the tap (A)
5)
turn off the taps (E) to avoid overfi lling.
Turn the tap (A) fully off and screw the cap (B)
6)
back into place.
To empty the jacket, unscrew the cap (F)
7)
provided underneath the appliance.
Caution - Warning
Never open the jacket fi ller cap (B) or the
level checking tap (A) when the appliance is
in operation or still hot.
GB
To avoid any health and safety risks (back
injuries) arising from the handling of the equip-
ment, the basket containing the product must
be removed by two operatives or with the aid of
suitable lifting equipment.
To avoid scalding, suitable equipment (gloves,
hooks, etc.) should be used when pulling out
the handles used to lift the basket.
3320140_ut_GB_rev.1
FILLING THE JACKET
REMOVING THE BASKET AND USE OF THE HANDLES
C
D
A
F
Customers (Employers) are reminded of their
obligation to assess the residual risks to the
health and safety of operatives arising from the
use of the appliance (and its accessories), and to
take the appropriate preventive measures.
- 10 -
B
E
ENGLISH