Publicidad
Idiomas disponibles
Idiomas disponibles
5. TECHNICAL DESCRIPTION OF THE MACHINE
C
A
A
C
B
B
5.1 Description of machine operating functions
The power needed to knead the ingredients placed in the bowl is absorbed from the mains network.
The spiral mixer tool and bowl are driven by a single motor when the machine is started.
The bowl and tool rotation motor is normally a single-phase asynchronous motor, a 1 speed three-
phase motor or a 2 speed three-phase motor; the drive power is achieved as follows:
motor —> chain transmission —> reduced speed chain transmission —> tool and bowl
The tool rotates around a fixed vertical axis, the rotation of the bowl transfers the dough to the spiral
mixer tool zone, the tool motion speed is synchronised with that of the bowl.
After being starting, the machine will perform the desired operation. The machine can be stopped by
pressing the emergency button or lifting the accident prevention guard on the bowl.
To manually inspect the dough or add ingredients, it is recommended to use the dedicated opening
on the mobile accident prevention guard.
36
26
Publicidad
