Publicidad
Idiomas disponibles
Idiomas disponibles
eNGLISH
Commissioning
7.
COMMISSIONING
7.1
Scope of delivery
• 1 x ORBITWIN SW switching device
• 2 x Connection line weld current
• 2 x Connection hoses coolant
• 1 x Connection hose weld gas
• 1 x ORBITWIN SW control cable at ORBIMAT SW
• 1 x Connection set ORBITWIN SW at ORBIMAT SW
• 1 x Gas input hose "Permanent gas" (3M)
• 3 x Weld current connection adapter sets
• 1 x Operating instructions with spare part list
7.2
Accessories (optionally available)
• Connection set ORBITWIN SW at ORBIMAT CA (Code 853 050 010).
For mechanical connection of the ORBITWIN SW at ORBIMAT CA power supplies.
7.3
Checking the scope of delivery
X Check the delivery for completeness and damage caused by transport.
X Report any missing parts or damage caused by transport to your supplier immediately.
7.4
Preparing initial operation
Prerequisite: Welding power supply connected and ready to operate.
X Check the switching device, power line, connection hoses and cables for damage.
X Check the working environment for possible sources of danger and, if applicable, eliminate these.
X Check the switching device for loose parts.
42
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
ORBITWIN SW
[REV. 20230213] OW_ORBITWIN_SW_BA_853060201_01__INH-02_EN
Publicidad
