Basic Operations; Turning On The Power; Selecting The Source To Play; Adjusting The Volume - JVC RX-DV31SL Manual De Instrucciones

Basic Operations

Turning On the Power

Press STANDBY/ON on the front panel or
AUDIO on the remote control.
STANDBY
STANDBY/ON
On the front panel
The STANDBY lamp goes off and the illumination lamp lights
up.
The current source name appears on the display.
• If "DVD" is the current source, "READING" appears while
the unit is detecting the type of the loaded disc (see page
34).
– Playback starts automatically when you load some DVD
VIDEO.
– "NO DISC" appears on the display when no disc is
loaded.
To turn off the power (into standby)
Press STANDBY/ON on the front panel or
the remote control again.
The illumination lamp goes off and the STANDBY lamp lights
up.
Note:
• A small amount of power is consumed even in standby mode. To
turn off the power completely, unplug the AC power cord.

Selecting the Source to Play

Press one of the source selecting buttons.
On the front panel
From the remote control
Select the built-in DVD player.
DVD
DBS Select the DBS tuner.
VCR Select the VCR.
TV Select the TV tuner.
TAPE/CDR Select the cassette deck or the CD recorder
(front panel ONLY).
TAPE* Select the cassette deck (remote control
ONLY).
CDR* Select the CD recorder (remote control ONLY).
FM/AM Select an FM or AM broadcast.
From the remote control
AUDIO on
Notes:
• When you have connected some digital components using the
digital terminals (see page 11), register the digital input terminal
setting (see "Digital input (DIGITAL IN) terminals" on page 27) and
digital input mode setting correctly (see "Selecting the Analog or
Digital Input Mode" on page 14). Source name and "DIGITAL" will be
shown on the display when you select the source.
* You can use only one of the buttons—TAPE or CDR—whichever
the source name is activated (see "Changing the Source Name" on
page 13).

Adjusting the Volume

On the front panel
To increase the volume,
turn MASTER VOLUME clockwise.
To decrease the volume,
turn MASTER VOLUME counterclockwise.
From the remote control
To increase the volume,
press and hold VOLUME +.
To decrease the volume,
press and hold VOLUME –.
CAUTION:
Always set the volume to the minimum before starting any
source. If the volume is set at a high level, the sudden blast of
sound energy can permanently damage your hearing and/or
ruin your speakers.
Notes:
• The volume level can be adjusted within the range of "0" (minimum)
to "50" (maximum).
• When "DVD" is selected as the source with your TV turned on, the
volume level indication appears on the TV.
MASTER VOLUME
12