Changing The Vfp Setting - JVC RX-DV31SL Manual De Instrucciones

Centro de control de cine en casa con reproductor de dvd audio/video
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DVD Player Operations

Changing the VFP Setting

The VFP (Video Fine Processor) function enables you to
adjust the picture based on the picture tone, or personal
preference.
Before using the remote control, press DVD so that the
remote control works for the DVD player.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
1
Press VFP.
The current VFP setting screen appears on the TV.
Ex.: When "NORMAL" is selected
2
Press cursor 3 (or 2) repeatedly to select
the VFP mode.
• Each time you press the button, the VFP mode changes
as follows.
NORMAL " CINEMA " USER1 " USER2 "
(back to the beginning)
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters that
affect the appearance of picture
and store the settings (see the right
column).
To turn off the VFP setting screen
Press VFP.
45
& During playback
NORMAL
+0
GAMMA
+0
BRIGHTNESS
+0
CONTRAST
+0
SATURATION
+0
TINT
+3
SHARPNESS
Y DELAY
+0
To adjust the appearance of the picture
You can adjust the appearance of picture and store in
"USER1" and "USER2."
1
Press VFP, then press cursor 3 (or 2)
repeatedly to select "USER1" or "USER2."
USER1
2
Press cursor ∞ (or 5) repeatedly to select a
parameter you want to adjust.
Adjust the parameters so that the picture you are viewing
appears as you prefer.
GAMMA
Adjust if the neutral color is bright or
dark. The brightness of dark and bright
portions is maintained.
Available range: –4 (darkest) to +4
(brightest)
BRIGHTNESS
Adjust if the picture is bright or dark on
the whole.
Available range: –16 (darkest) to +16
(brightest)
CONTRAST
Adjust if the far and near position is
unnatural.
Available range: –16 to +16
SATURATION
Adjust if the picture is whitish or
blackish.
Available range: –16 (most blackish) to
+16 (whitest)
TINT
Adjust if the human skin color is
unnatural.
Available range: –16 to +16
SHARPNESS
Adjust if the picture is indistinct.
Available range: +0 to +3
Y DELAY
Adjust if the picture looks separately/
overlapped.
Available range: –2 to +2
3
Press ENTER.
VFP parameters list disappears, and the following pop-up
window for the selected item appears on the TV.
GAMMA
GAMMA
Ex.: When "GAMMA" is selected
+0
GAMMA
+0
BRIGHTNESS
+0
CONTRAST
+0
SATURATION
+0
TINT
+3
SHARPNESS
+0
Y DELAY
+ 0
+ 0

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido