Selco Genesis 4000 PSR Instrucciones De Uso página 35

2.4 Installation
Connection for MIG/MAG welding - RI - External cabinet
Connection for MIG/MAG welding - RI BOX
Connect the power cable to the appropriate outlet (1).
Insert the plug and turn clockwise until all parts are secured.
- Connect the signal cable to the appropriate connector (2).
Insert the connector and screw the ring nut clockwise until all
parts are secured.
- Connect the gas hose to the pressure reducing valve of the
cylinder or to the gas supply connection.
- Connect the water pipe (blue coloured
quick connector of the cooling unit.
- Connect the water pipe (red coloured
connector of the cooling unit.
- Connect the CAN-BUS signal cable for the control of exter-
nal devices (such as RC, RI...) to the appropriate connector
(3-5).
Insert the connector and rotate the ring nut clockwise until the
parts are properly secured.
) to the outlet
) to the inlet quick
35