Selco Genesis 4000 PSR Instrucciones De Uso página 37

3.2 Front control panel (RC350)
1 Power supply
Indicates that the equipment is connected to the mains
and is on.
2 General alarm
Indicates the possible intervention of protection devices
such as the temperature protection.
3 Power on
Indicates the presence of voltage on the equipment
outlet connections.
4 7-segment display
Allows the general welding machine parameters to be
displayed during start-up, settings, current and voltage
readings, while welding, and encoding of the alarms.
5 LCD display
Allows the general welding machine parameters to be
displayed during start-up, settings, current and voltage
readings, while welding, and encoding of the alarms.
Allows all the operations to be displayed instantaneously.
6 Main adjustment handle
Allows entry to set up, the selection and the setting of
the welding parameters.
7 Processes/functions
Allow the selection of the functions provided on the
system to which the remote control is connected.
Consult the instruction manual Genesis ...
8 Synergy
Lets you select a preset welding program (synergy) by
choosing a few simple settings:
- wire type
- gas type
- wire diameter
9 Programs (JOB)
Allows the storage and management of 64 welding
programs which can be personalised by the operator.
3.3 Starting Screen
When switched on, the generator performs a succession of
checks in order to guarantee the correct operation of the system
and of all the devices connected to it.
At this stage the gas test is also carried out to check the proper
connection to the gas supply system.
3.4 Main Screen
Allows the control of the system and of the welding process,
showing the main settings.
1 Heading
Allows the display of certain pieces of important infor-
mation relating to the selected process:
- The synergic curve selected
1a Type of filler metal
1b Wire diameter
1c Type of gas
- Welding parameters
1d Welding current
1e Part thickness
1f Corner bead
1g Welding voltage
37