Selco Genesis 4000 PSR Instrucciones De Uso página 41

3.6 Synergic curves screen
1 General
Allows the selection of the required welding method.
STANDARD MIG/MAG - PULSED MIG/MAG
RAPIDEEP
QUICKPULSE
1
It allows the selection of:
Synergic welding method
Makes it possible to use a series of pre-settings
(synergic curves) available in the memory of the
system.
The changing and correction of the initial set-
tings proposed by the system is allowed.
Manual welding method
Allows the manual setting and regulation of
each individual welding parameter (MIG/
MAG).
Select however one of suggested synergies (5-6) in
order to take advantage of ignition potentiality,
closing arc features....
2/3
Lets you select:
- type of filler material
- gas type
4
Lets you select:
- wire diameter
5
- Type of filler material
- Gas type
6 Wire diameter
7 Header
(See the "Main screen" section).
NO PROGRAM
Indicates that the selected synergic program is not avail-
able or is not consistent with the other system settings.
41