Selco Genesis 4000 PSR Instrucciones De Uso página 43

3.7 Programs screen
1 General
Allows the storage and management of 64 welding pro-
grams which can be personalised by the operator.
1/2/3/4 Functions
5 Number of the selected program
6 Main parameters of the selected program
7 Description of the selected program
8 Heading
(consult the "Main screen" section).
2 Program storage
Enter the "program storage" menu by pressing button
for at least 1 second.
ù
Select the required program (or the empty memory) (5)
by rotating the encoder.
Program stored
Memory empty
Cancel the operation by pressing button (2)
Save all the current settings on the selected program by
pressing button (3)
Introduce a description of the program (7).
- Select the required letter by rotating the encoder.
- Store the selected letter by pressing the encoder.
- Cancel the last letter by pressing button (1)
Cancel the operation by pressing button (2)
Confirm the operation by pressing button (3)
The storage of a new program on an already occupied
memory location requires cancellation of the memory
location by an obligatory procedure.
Cancel the operation by pressing button (2)
Remove the selected program by pressing button (1)
.
Resume the storage procedure.
3 Program retrieval
Retrieve the 1st program available by pressing button
.
Select the required program by pressing button
Select the required program by rotating the encoder.
.
.
.
.
.
.
.
43