Outboard Motor Installation; Motor Selection - HONDA marine BF40D Instrucciones Del Montaje

5. OUTBOARD MOTOR
INSTALLATION

MOTOR SELECTION

• For secure and safe sailing, install the outboard
motor on the transom of the boat properly.
Improperly installed outboard motor will result in
the displaced outboard motor, lack of speed and
stability, and poor fuel economy. In addition, the
boat does not drive straight unless the outboard
motor is installed properly.
• Install the outboard motor that conforms to the boat
manufacturer's recommended horsepower.
Never install an outboard motor which exceeds the
recommended maximum horsepower of the boat.
MAXIMUM HORSEPOWER:
BF40D: 29.4 kW (40 PS)
BF50D: 36.8 kW (50 PS)
• Install the outboard motor in an adequate place
where it does not hinder your operating the
outboard motor during tilt-up and steering. Refer to
the drawings shown below and on the following
page for the dimensions of the outboard motor.
Dimensions of the outboard motor during tilt-up
and steering
S type: 805 (31.7)
L type: 900 (35.4)
Y type: 931 (36.7)
X type: 990 (39.0)
794 (31.3) *2
694 (27.9) *1
546 (21.5)
*1: Remote cojntrol type
*2: Tiller handle type
12
Unit: mm (in)
1,300 (51.2) *2
407 (16.0)
62 (2.4)